Origin	China
Brand Name	king star
Color	White
Input Voltage	12v
Life	50,000h

ED Bar,LED Rigid Light,LED Rigid Bar,LED Bar Light,LED Rigid Strip

specification:

1:circuit PCB:500*8*2mm/pcs

2:DC12V/600mA/pcs

3:SMD 5060 LED,30led/pcs

4:different color are available:white,yellow,blue,green,red,RGB

5:nonwaterproof used indoor only

Application

Assembly Information

- Solder connection should only be performed on designated solder pads (marked “ +/-”). During? soldering, don’t
exceed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260 Celsius degrees.
- The smallest unit (3 LEDs) can be removed by cutting with scissors between the designated
solder pads.
- The mounting of the strip is facilitated by means of the double-sided adhesive on the back-surface of the strip.
Care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt
partide. The mounting substrate must have sufficient structural integrity. Take care to completely remove the
adhesive backing. Once the strip is appropriately positioned. Press on the strip with about 20N/cm2 (refer to
application techniques of 3M adhesive transfer tapes).
- The minimum bending radius is 2 cm. The strip may be bent over a smaller radius of the circuit board containing
no electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue.